Using the Song Sequencer

To delete all events in a track

1.Display the event editor screen of the track that includes the events you want to delete.

•See “To select a track for editing” (page E-91).

2.While holding down the R-13 (FUNCTION) button, press the C-17 (MENU) button to display the event editor menu.

3.Use the R-17 (t, y) buttons to move the 0to “Delete” and then press the R-16 (ENTER) button.

•This displays the “Delete” screen.

4.Use the dial or R-14 (–, +) buttons to change the setting in the thick brackets (%) to “All”, and then press the R-16 (ENTER) button.

5.In response to the “Sure?” message that appears, press the R-14 (YES) button to delete or the R-14 (NO) button to cancel.

To delete all events in a specific range of a track

1.Display the event editor screen of the track that includes the events you want to delete.

•See “To select a track for editing” (page E-91).

2.If required, you can perform a song playback operation at this time to check the range you want to select for deletion.

•See “To play back a song from the event editor screen (Quick Play)” (page E-91).

3.While holding down the R-13 (FUNCTION) button, press the C-17 (MENU) button to display the event editor menu.

4.Use the R-17 (t, y) buttons to move the 0to “Delete” and then press the R-16 (ENTER) button.

•This displays the “Delete” screen.

5.Use the dial or R-14 (–, +) buttons to change the setting in the thick brackets (%) to “Locator”.

•This displays a range specification screen like the one shown below.

•If you have already specified a range using the locator screen (page E-80), that range will be displayed on the range specification screen.

Range start point

Range end point

6.Use the R-17 (u, i) buttons to move the cursor, and then use the dial or R-14 (–, +) buttons to change the value at the cursor position.

•The event located at the timing specified by the range end point will not be deleted.

7.After everything is the way you want, press the R-16 (ENTER) button.

8.In response to the “Sure?” message that appears, press the R-14 (YES) button to delete or the R-14 (NO) button to cancel.

E-93