Using a Memory Card

■ Memory card Data Storage

 

7. In response to the “Sure?” message that

The above procedure stores Digital Keyboard data in a folder

 

appears, press the R-14 (YES) button to load or

named MUSICDAT on the memory card.

 

the R-14 (NO) button to cancel.

• The MUSICDAT folder is created automatically when you

 

* The “Xxxx” part of the file name depends the type of data

format the memory card on the Digital Keyboard (page

 

E-137).

 

on the memory card.

• Note that files not in the MUSICDAT folder cannot be

 

To batch load all Digital Keyboard memory

loaded, deleted, or renamed by this Digital Keyboard. You

 

also will not be able to load or delete any file stored in any

 

data from a memory card

subfolder inside the MUSICDAT folder.

 

 

 

1. Press the C-9 (CARD) button to enter the card

 

 

 

Loading Data from a Memory

 

mode.

Card

 

2. While holding down the R-13 (FUNCTION)

 

 

 

button, press the C-17 (MENU) button.

 

 

 

• This displays the function menu “Play/CardUtl” screen.

• Make sure that all of the data you want to load is in the

 

3. Use the R-17 (t, y) buttons to move the 0 to

MUSICDAT folder on the memory card.

 

 

 

 

“AllData” and then press the R-16 (ENTER)

To load data to Digital Keyboard memory

 

button.

from a memory card

 

• This displays the “All Load” screen.

 

 

 

• The remainder of the steps are the same as those from

1. Insert the memory card into the card slot.

 

step 5 under “To load data to Digital Keyboard memory

 

 

 

from a memory card” (page E-140).

2.If the Digital Keyboard is in the card mode, press the C-9 (CARD) button to exit the card mode.

3.Referring to the table in step 3 of the procedure under “To save Digital Keyboard data to a memory card” (page E-138), perform the procedure required for the type of data you want to load from the card.

•All setup registration banks are loaded as a batch. Other data is loaded in area (data item) units.

4.While holding down the R-13 (FUNCTION) button, press the C-9 (LOAD/SAVE) button.

•This causes an “Xxxx Load”* screen like the one shown below to appear. The sample screen below shows the screen that appears from the rhythm screen.

5.Use the dial or R-14 (–, +) buttons to display the file you want to import.

6.Press the R-16 (ENTER) button.

E-140