Using the Song Sequencer

To clear the content of a single track immediately after recording it

1.While the song sequencer mode initial screen is on the display after track recording is complete, hold down the R-13 (FUNCTION) button as you press the C-17 (MENU) button.

•This displays the song sequencer menu with the 0 located at “ClearTrack”.

2.Press the R-16 (ENTER) button.

•This causes the “Clear Track” screen to appear. At this time the target track for the clear operation is the one you just recorded.

3.Press the R-16 (ENTER) button.

•This will cause the confirmation message “Sure?” to appear.

4.Press the R-14 (YES) button to clear the track data or the R-14 (NO) button to cancel.

•For information on how to select a particular track and clear its content, see “To clear a single track” (page E-85).

To clear a single song immediately after recording it

1.While the song sequencer mode initial screen is on the display after track recording is complete, hold down the R-13 (FUNCTION) button as you press the C-17 (MENU) button.

•This displays the song sequencer menu.

2.Use the R-17 (t, y) buttons to move the 0 to “ClearSong” and then press the R-16 (ENTER) button.

•This causes the “Clear Song” screen to appear. At this time the target song for the clear operation is the one you just recorded.

3.Press the R-16 (ENTER) button.

•This will cause the confirmation message “Sure?” to appear.

4.Press the R-14 (YES) button to clear the song data or the R-14 (NO) button to cancel.

•For information on how to select a particular song and clear its content, see “To clear a song” (page E-82).

E-75