Using the Song Sequencer

To copy one track to another track (Tracks 01 through 16 only)

1.Perform the procedure under “To start a track editor operation” on page E-85 to display the track editor menu.

2.Use the R-17 (t, y) buttons to move the 0to “Copy” and then press the R-16 (ENTER) button.

•This causes the “Copy Track” screen to appear. At this time the thick brackets (%) will be located at the “Copy” setting.

3.Use the dial or R-14 (–, +) buttons to specify the track number you want to copy from.

4.Press the R-17 (y) button to move the thick brackets (%) to “To”.

•An asterisk (*) next to a track number indicates that there is already data recorded in that track.

5.Use the dial or R-14 (–, +) buttons to specify the track number you want to copy to.

6.After everything is the way you want, press the R-16 (ENTER) button.

•If the copy destination track does not contain recorded data, the copy operation is performed immediately.

•If the copy destination track already contains recorded data, the confirmation message shown below appears asking if you want to overwrite the existing data.

Press the R-14 (YES) button to perform the copy operation and overwrite the existing track or the R-14 (NO) button to cancel.

To combine two tracks into a single track (Tracks 01 through 16 only)

1.In the song sequencer mode, use the R-17 (u, i) buttons to select the lower numbered track of those you want to combine.

•As an example, we will combine Track 03 and Track 05 into Track 06. Here, select Track 03.

2.Perform steps 2 and 3 of the procedure under “To start a track editor operation” on page E-85 to display the track editor menu.

3.Use the R-17 (y) button to move the 0to “Merge” and then press the R-16 (ENTER) button.

•This displays a “Merge Track” screen like the one

shown below. At this time the thick brackets (%) will be located at setting .

AB C

: One of the tracks to be combined (The track you selected in step 1 is the initial default selection).

: Other track to be combined.

: Destination track of combined tracks.

4.Use the dial or R-14 (–, +) buttons to specify 05 (Track 05) for .

•Changing the value of also causes the value to change.

5.Press an R-17 (ior y) button to move the thick brackets (%) to .

6.Use the dial or R-14 (–, +) buttons to specify 06 (Track 06) for .

E-86