Using the Tone Editor

 

 

 

 

 

4. Use the dial or R-14 (–, +) buttons to change the

 

Creating a User Tone

 

 

 

setting value.

 

 

 

 

 

 

• Pressing the R-14(–, +) buttons at the same time

 

User Tone Numbers

 

 

returns a parameter to its initial default setting.

 

 

 

 

 

5. Repeat steps 3 and 4 as required to configure

Tone areas numbered K:001 through K:100 are for storage of

 

user tones. You can have up to 100 user tones stored in

 

 

other parameters.

memory at one time. You can recall a stored user tone by

 

6. To save a rhythm after you edit it, hold down

pressing the R-11 ([K] USER TONES) button. See “To select

 

a tone” (page E-14).

 

 

the R-13 (FUNCTION) button as you press the

 

 

 

 

 

 

 

To create and save a user tone

 

 

C-17 (MENU) button.

 

 

 

 

 

• This displays the tone editor menu.

 

 

 

 

 

 

1. Select the tone you want to edit in order to

 

7. Press the R-16 (ENTER) button.

 

create your user tone.

 

 

• This displays a screen for specifying the destination

 

• Select the tone you want to edit from group A through J

 

 

user tone number and tone name.

 

(preset tones) or group K (user tones).

 

 

Destination user tone number

 

• The parameters you can edit for group L (drawbar

 

 

 

 

 

 

 

 

 

 

 

organ) tones are different from those that you can edit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

for group A through K tones. See “Editing Drawbar

 

 

 

 

 

 

 

 

Organ Tones” (page E-52) for more information.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Press the C-8 (TONE EDITOR) button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tone name

•

This displays the tone editor screen.

8. Use the dial or R-14 (–, +) buttons to select the

 

 

 

 

Total number of pages

 

 

 

 

destination user tone number you want.

 

 

 

Currently displayed page

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9. Use the R-17 (u, i) buttons to move the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

cursor to the name character position you want

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to change, and then use the dial or R-14 (–, +)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

buttons to select the character you want.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•

See “Supported Input Characters” (page E-160) for

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

information about the characters you can input for the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

name.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•

To input a space, press both of the R-14(–, +) buttons

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

at the same time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10. After everything is the way you want, press the

Parameter name

 

Current setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Currently selected parameter

R-16 (ENTER) button.

 

 

 

(Enclosed by thick brackets %).

•

A message (Replace?) will appear on the display to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•

You can use the R-17 (u, i) buttons to scroll

 

confirm whether you want to replace the existing data

 

between pages.

 

 

 

 

 

 

 

 

 

 

 

 

with the new data. Press the R-14 (YES) button to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

replace the existing data with the new data.

3.Use the R-17 (t, y) buttons to move the 0to the parameter you want to change.

•For information about the operation and the setting range of each parameter, see “Tone Parameter Settings” (page E-48).

E-46