Glossary

L

Lightweight access An access point operating in the Cisco Centralized Wireless LAN Architecture

point

with a Cisco Wireless LAN Controller.

LWAPP

Lightweight Access Point Protocol. An Internet Engineering Task Force (IETF)

 

draft protocol used in the Cisco Centralized Wireless LAN Architecture.

M

MAC

Media Access Control address. A unique 48-bit number used in Ethernet data

 

packets to identify an Ethernet device, such as an access point or your client

 

adapter.

modulation

Any of several techniques for combining user information with a transmitter’s

 

carrier signal.

multipath

The echoes created as a radio signal bounces off of physical objects.

multicast packet

A single data message (packet) sent to multiple addresses.

O

omni-directional

This typically refers to a primarily circular antenna radiation pattern.

Orthogonal

A modulation technique used by IEEE 802.11a-compliant wireless LANs for

Frequency Division

transmission at 6, 9, 12, 18, 24, 36, 48, and 54 Mbps.

Multiplex (OFDM)

 

P

packet

A basic message unit for communication across a network. A packet usually includes routing

 

information, data, and sometimes error detection information.

Q

Quadruple Phase

 

Shift Keying

A modulation technique used by IEEE 802.11b-compliant wireless LANs for

 

transmission at 2 Mbps.

Cisco Aironet 1200 Series Access Point Hardware Installation Guide

 

GL-4

OL-8370-04

 

 

 

Page 134
Image 134
Cisco Systems 1200 manual GL-4