Cisco Systems 1200 manual Overview, Product Terminology, Autonomous Access Points

C H A P T E R 1

Overview

The Cisco Aironet Cisco Aironet 1200 Series Access Point is available in autonomous and lightweight configurations. The autonomous access points can support standalone network configurations with all configuration settings maintained within the access points. The lightweight access points operate in conjunction with a Cisco wireless LAN controller with all configuration information maintained within the controller.

Product Terminology

The following terms refer to the autonomous and lightweight products:

•The term access point describes both autonomous and lightweight products.

•The term autonomous access point describes only the autonomous product.

•The term lightweight access point describs only the lightweight product.

•The term access point describes a product operating as an access point.

•The term bridge describes a product operating as a bridge.

Autonomous Access Points

Cisco Aironet 1200 Series Access Points (models: AIR-AP1200, AIR-AP1210, AIR-AP1220B, AIR-AP1230B, AIR-AP1220A, AIR-AP-1230A, AIR-AP1231G, and AIR-AP1232AG) provide a secure, affordable, and easy-to-use wireless LAN solution that combines mobility and flexibility with the enterprise-class features required by networking professionals. With a management system based on Cisco IOS software, the 1200 series access point is a Wi-Fi certified, wireless LAN transceiver.

The 1200 series access point can contain two radios: a 2.4-GHz radio (IEEE 802.11b or IEEE 802.11g) in an internal mini-PCI slot and a 5-GHz radio module (IEEE 802.11a) in an external, modified cardbus slot. The access point supports one radio of each type, but it does not support two 2.4-GHz or two 5-GHz radios. You can configure the radios separately, using different settings on each radio.

The access point serves as the connection point between wireless and wired networks or as the center point of a stand-alone wireless network. In large installations, wireless users within radio range of an access point can roam throughout a facility while maintaining seamless, uninterrupted access to the network.

You can configure and monitor the access point using the command-line interface (CLI), the browser-based management system, or Simple Network Management Protocol (SNMP).

Cisco Aironet 1200 Series Access Point Hardware Installation Guide

OL-8370-04 1-1