Cisco Systems 1200 manual Unpacking the Access Point, Package Contents

Chapter 2 Installing the Access Point

Unpacking the Access Point

Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001

Warning Read the installation instructions before you connect the system to its power source. Statement 1004

Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 20A Statement 1005

Unpacking the Access Point

Follow these steps to unpack the access point:

Step 1 Open the shipping container and carefully remove the contents.

Step 2 Return all packing materials to the shipping container and save it.

Step 3 Ensure that all items listed in the “Package Contents” section are included in the shipment. Check each item for damage. If any item is damaged or missing, notify your authorized Cisco sales representative.

Package Contents

Each access point package contains the following items:

•Cisco Aironet 1200 Series Access Point or Cisco Aironet 1200 Series Lightweight Access Point

•Cisco Aironet 1200 Series Power Module (Universal power supply)

•Product quick start guide

•Translated safety warnings document

•Cisco product registration and Cisco documentation feedback cards

The optional 2.4-GHz radio upgrade kit is shipped with the following items:

•2.4-GHz radio card (802.11g)

•Installation guide

•A product registration card

•A T-10 tamper-resistant Torx L-wrench

•2.4-GHz radio product compliance label

The optional 5-GHz radio upgrade kit is shipped with the following items:

•5-GHz radio module (RM21A or RM22A)

•Installation guide

•A product registration card and a 5-GHz radio product compliance label

•A T-10 tamper-resistant Torx L-wrench

Cisco Aironet 1200 Series Access Point Hardware Installation Guide

2-3 OL-8370-04