Cisco Systems 1200 manual Mode Button Setting

Contents

	Installing a 5-GHz Radio Module 5-5
	Attaching the Compliance Label 5-7
	Troubleshooting Autonomous Access Points 6-1
C H A P T E R 6
	Checking the Top Panel LEDs 6-2
	Checking Basic Settings 6-4

		Default IP Address Behavior		6-4
		Default SSID and Radio Behavior			6-4
		Enabling the Radio Interfaces		6-4
		SSID 6-5
		WEP Keys 6-5
		Security Settings 6-5
		Running the Carrier Busy Test	6-5
		Running the Ping or Link Test	6-6
		Resetting to the Default Configuration			6-7
		Using the MODE Button	6-7
		Using the Web Browser Interface			6-8
		Reloading the Access Point Image		6-8
		Using the MODE button	6-9
		Web Browser Interface	6-10
		Browser HTTP Interface		6-10
		Browser TFTP Interface		6-10
		Obtaining the Access Point Image File			6-11
		Obtaining the TFTP Server Software			6-12
		Connecting to the Access Point Locally			6-13
		Troubleshooting Lightweight Access Points 7-1
C H A P T E R 7
		Guidelines for Using 1200 Series Lightweight Access Points 7-2
		Using DHCP Option 43	7-2
		Checking the Top Panel LEDs	7-3
		Manually Configuring Controller Information Using the Access Point CLI					7-5
		Configuring Controller Information			7-5
		Clearing Manually Entered Controller Information				7-5
		Manually Resetting the Access Point to Defaults				7-6
		Returning the Access Point to Autonomous Mode 7-6
		Using a Controller to Return the Access Point to Autonomous Mode					7-6
		Using the MODE Button to Return the Access Point to Autonomous Mode 7-7
		MODE Button Setting 7-7
			Cisco Aironet 1200 Series Access Point Hardware Installation Guide
	OL-8370-04							v