Cisco Systems 1200 manual Placing the Labels

Chapter 4 Upgrading the 2.4-GHz Radio

Attaching the Compliance Labels

Placing the Labels

The 802.11g radio upgrade kit ships with the following labels for the 1100 and 1200 series access points:

•1100 series access point upgrade label (AIR-1121G-x-K9 UPGRADE)—not used on the 1200 series access point.

•1200 series product compliance label (AIR-AP1231G-x-K9)

•1200 series radio compliance label (AIR-MP21G-x-K9)

Table 4-1shows where to place the labels on your 1200 series access point, based on the model you are upgrading. Follow these steps to place the labels correctly:

Step 1 Check the product compliance label to identify the model number of your 1200 series access point. Step 2 Use the matrix in Table 4-1to decide which labels to use and where to place them on the access point.

Table 4-1

1200 Series	AIR-MP21G-x-K9	AIR-AP1231G-x-K9 Product
Model	Radio Compliance Label	Compliance Label
AIR-AP1200	Place over existing AIR-MP20B-x-K9	—
	radio compliance label or location 2 if no
AIR-AP1210
	label exists.
AIR-AP1220A
AIR-AP1230A
AIR-AP1220B	—	Place over existing AIR-AP12xx-x-K9
		product compliance label.
AIR-AP1230B

Step 3 Discard any labels that you did not use.

The radio card installation is now complete.

Cisco Aironet 1200 Series Access Point Hardware Installation Guide

4-10 OL-8370-04