Cisco Systems 1200 manual Removing the 5-GHz Radio Module

Chapter 5 Upgrading the 5-GHz Radio Module

Removing a 5-GHz Radio Module

Step 4 Insert your fingers into the base (latch opening) of the 5-GHz radio module (closest to the access point) and pull straight out from the access point (see Figure 5-3).

Figure 5-3 Removing the 5-GHz Radio Module

74629

Step 5 For a radio module with built-in antenna, fold the antenna down (towards the attached radio card) and insert the module into a static protected bag.

Step 6 For a radio module with connectors, insert the radio module into a static protected bag.

To install a new 5-GHz radio module, see the “Installing a 5-GHz Radio Module” section on page 5-5.

Cisco Aironet 1200 Series Access Point Hardware Installation Guide

5-4 OL-8370-04