Cisco Systems 1200 manual Location of Retaining Clips on 2.4-GHz Radio Card

Chapter 4 Upgrading the 2.4-GHz Radio

Removing a 2.4-GHz Radio

Step 2 Remove the 2.4-GHz radio card from the mini-PCI connector by performing the following operations:

a.Push the card-retaining clips (on each side of card) away from the card (see Figure 4-3). When released, the radio card springs up (see Figure 4-4).

Figure 4-3 Location of Retaining Clips on 2.4-GHz Radio Card

1 1

MAIN AUX

1

74253

Card-retaining clips

b.Grasp the radio card only on the edges, being careful not to touch components on the board or the gold connector pins.

c.Remove the 2.4-GHz card from the mini-PCI connector.

Step 3 Place the removed 2.4GHz radio card into an anti-static bag.

For instructions on installing a new radio card, go to the “Installing a 2.4-GHz Radio” section.

Cisco Aironet 1200 Series Access Point Hardware Installation Guide

4-6 OL-8370-04