B-24
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
AppendixB Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with Software Images
Working with Software Images
This section describes how to archive (download and upload) software image files, whi ch con tai n t he
system software, the Cisco IOS code, and the embedded device manager software.
Note Instead of using the copy privileged EXEC command or the archive tar privileged EXEC command, we
recommend using the archive download-sw and archive upload-sw privileged EXEC commands to
download and upload software image files. For switch stacks, the archive download-sw and archive
upload-sw privileged EXEC commands can only be used through the stack master. Software images
downloaded to the stack master are automatically downloaded to the rest of the stack members.
To upgrade a switch with an incompatible software image, use the archive copy-sw privileged EXEC
command to copy the software image from an existing stack member to the incompatible switch. That
switch automatically reloads and joins the stack as a fully functioning member.
You can download a switch image file from a TFTP, FTP, or RCP server to upgrade the switch software.
If you do not have access to a TFTP server, you can download a software image file directly to your PC
or workstation by using a web browser (HTTP) and then by using the device mana ger or Cisco Network
Assistant to upgrade your switch. For information about upgrading your switch by using a TFTP server
or a web browser (HTTP), see the release notes.
You can replace the current image with the new one or keep the c ur re nt im ag e in fl ash m em ory a ft er a
download.
You can use the archive download-sw /allow-feature-upgrade privileged EXEC command to allow
installation of an image with a different feature set, for example, upgrad ing fr om t he no ncr ypt og raph ic
universal image with the IP services feature set to the cryptographic universal image with the advanced
IP services feature set. You can also use the boot auto-download-sw global configuration command to
specify a URL to use to get an image for automatic software upgrades. When you enter this command,
the master switch uses this URL in case of a version mismatch.
You upload a switch image file to a TFTP, FTP, or RCP server for backup purposes. You can use this
uploaded image for future downloads to the same switch or to another of the same type.
The protocol that you use depends on which type of server you are using. The FTP and RCP transport
mechanisms provide faster performance and more reliable del ivery of da ta th an T F TP. These
improvements are possible because FTP and RCP are built on and use the TCP/IP stack, which i s
connection-oriented.
Step6 configure confirm (Optional) Confirm replacement of the running configuration with a saved
configuration file.
Note Use this command only if the time seconds keyword and argument of
the configure replace command are specified.
Step7 copy running-config
startup-config (Optional) Save your entries in the configuration file.
Command Purpose