7-9
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter7 Configuring Switch-Ba sed Authentication Protecting Access to Privileged EXEC Comman d s
Changing the Default Privilege Level for Lines
Beginning in privileged EXEC mode, follow these steps to change the default privilege level for a line:
Users can override the privilege level you set using the privilege level line configuration command by
logging in to the line and enabling a different privilege level. They can lo wer the pri vile ge le vel b y using
the disable command. If users know the password to a higher privilege level, they can use that password
to enable the higher privilege level. You might specify a high level or privilege level for your console
line to restrict line usage.
To return to the default line privilege level, use the no privilege level line configuration command.
Logging into and Exiting a Privilege Level
Beginning in privileged EXEC mode, follow these steps to log in to a specified privilege level and to exit
to a specified privilege level:
Command Purpose
Step1 configure terminal Enter global configuration mode.
Step2 line vty line Select the virtual terminal line on which to restrict access.
Step3 privilege level level Change the default privilege level for the line.
For level, the range is from 0 to 15. Level 1 is for normal user EXEC mode
privileges. Level 15 is the level of access permitted by the enable
password.
Step4 end Return to privileged EXEC mode.
Step5 show running-config
or
show privilege
Verify your entries.
The first command shows the password and access level configuration.
The second command shows the privilege level configuration.
Step6 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Step1 enable level Log in to a specified privilege level.
For level, the range is 0 to 15.
Step2 disable level Exit to a specified privilege level.
For level, the range is 0 to 15.