38-87
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter38 Configuring IP Unicast Routing Configuring Protocol-Independent Features
To delete an entry, use the no route-map map tag global configuration command or the no match or no
set route-map configuration commands.
You can distribute routes from one routing domain into another and control route distribution.
Step12 set dampening halflife reuse suppress
max-suppress-time Set BGP route dampening factors.
Step13 set local-preference value Assign a value to a local BGP path.
Step14 set origin {igp | egp as | incomplete} Set the BGP origin code.
Step15 set as-path {tag | prepend as-path-string} Modify the BGP autonomous system path.
Step16 set level {level-1 | level-2 | level-1-2 | stub-area |
backbone}Set the level for routes that are advertised into the
specified area of the routing domain. The stub-area and
backbone are OSPF NSSA and backbone areas.
Step17 set metric metric value Set the metric value to give the redistributed routes (for
EIGRP only). The metric value is an integer
from -294967295 to 294967295.
Step18 set metric bandwidth delay reliability loading mtu Set the metric value to give the redistributed routes (for
EIGRP only):
•bandwidth—Metric value or IGRP bandwidth of the
route in kilobits per second in the range 0 to
4294967295
•delay—Route delay in tens of microseconds in the
range 0 to 4294967295.
•reliability—Likelihood of successful packet
transmission expressed as a number between 0 and
255, where 255 means 100 percent reliability and 0
means no reliability.
•loading— Effective bandwidth of the route expr essed
as a number from 0 to 255 (255 is 100 percent
loading).
•mtu—Minimum maximum transmission unit (MTU)
size of the route in bytes in the ra nge 0 t o
4294967295.
Step19 set metric-type {type-1 | type-2} Set the OSPF external metric type for redistributed routes.
Step20 set metric-type internal Set the multi-exit discriminator (MED) value on prefixes
advertised to external BGP neighbor to match the IGP
metric of the next hop.
Step21 set weight Set the BGP weight for the routing table. The value can
be from 1 to 65535.
Step22 end Return to privileged EXEC mode.
Step23 show route-map Display all route maps configured or only the one
specified to verify configuration.
Step24 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose