1-9
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter1 Overview Features
Security Features
The switch ships with these security features:
•Web authentication to allow a supplicant (client) that does not sup port IEEE 8 02.1x func tionality to
be authenticated using a web browser.
•Password-protected access (read-only and read-write access) to management interfaces (device
manager, Network Assistant, and the CLI) for protection against unauthorized configuration
changes
•Multilevel security for a choice of security level, notification, and resulting actions
•Static MAC addressing for ensuring security
•Protected port option for restricting the forwarding of traffic to designated ports o n the same switch
•Port security option for limiting and identifying MAC addresses of the stations allowed to access
the port
•VLAN aware port security option to shut down the VLAN on the port when a violation occurs,
instead of shutting down the entire port
•Port security aging to set the aging time for secure addresses on a port
•BPDU guard for shutting down a Port Fast-configured port when an invalid configuration occurs
•Standard and extended IP access control lists (ACLs) for defining security policies in both direct ions
on routed interfaces (router ACLs) and VLANs and inbound on La ye r 2 i n terfa ces (po rt ACLs)
•Extended MAC access control lists for defining security policies in the inbound direction on Layer2
interfaces
•VLAN ACLs (VLAN maps) for providing intra-VLAN security by filtering traffic based on
information in the MAC, IP, and TCP/UDP headers
•Source and destination MAC-based ACLs for filtering non-IP traffic
•IPv6 ACLs to be applied to interfaces to filter IPv6 traffic
•DHCP snooping to filter untrusted DHCP messages between untrusted hosts and DHCP servers
•IP source guard to restrict traffic on nonrouted interfaces by filtering traffic based on the DHCP
snooping database and IP source bindings
•Dynamic ARP inspection to prevent malicious attacks on the switch by not relaying invalid ARP
requests and responses to other ports in the same VLAN
•IEEE 802.1Q tunneling so that customers with users at remote sites across a service-provider
network can keep VLANs segregated from other customers and Layer 2 protocol tunneling to en sure
that the customer’s network has complete STP, CDP, and VTP information about all users
•Layer 2 point-to-point tunneling to facilitate the automatic creation of EtherChannels
•Layer 2 protocol tunneling bypass feature to provide interoperability with third-party vendors
•IEEE 802.1x port-based authentication to prevent unauthorized devices (clients) from gaining
access to the network. These features are supported:
–
Multidomain authentication (MDA) to allow both a data device and a voice device, such as an
IP phone (Cisco or non-Cisco), to independently authenticate on the same IEEE 802.1x-enabled
switch port
–
VLAN assignment for restricting IEEE 802.1x-authenticated users to a sp ecified V LAN
–
Port security for controlling access to IEEE 802.1x ports