1-5
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter1 Overview Features
IIGMP Helper to allow the switch to forward a host request to join a multicast stream to a specific
IP destination address
Multicast Listener Discovery (MLD) snooping to enable efficient distribution of IP Version 6 (IPv6)
multicast data to clients and routers in a switched network.
Multicast VLAN registration (MVR) to continuously send multicast streams in a multicast VLAN
while isolating the streams from subscriber VLANs for bandwidth and security reasons
IGMP filtering for controlling the set of multicast groups to which hosts on a switch port can belong
IGMP throttling for configuring the action when the maximum number of entries is in the IGMP
forwarding table
IGMP leave timer for configuring the leave latency for the network
Switch Database Management (SDM) templates for allocating system resources to maximize
support for user-selected features
Web Cache Communication Protocol (WCCP) for redirecting traffic to wide-area application
engines, for enabling content requests to be fulfilled locally, and for localizing web-tr affic patter ns
in the network (requires the IP services image)
Management Options
These are the options for configuring and managing the switch:
An embedded device manager—The device manager is a GUI that is integrated in the universal
software image. You use it to configure and to monitor a single switch. For information about s ta rt in g
the device manager, see the getting started guide. For more information about the device manager, see
the switch online help.
Network Assistant—Network Assistant is a network management application that can be
downloaded from Cisco.com. You use it to manage a single switch, a cluster of switch es, o r a
community of devices. For more information about Network Assistant, see Getting Started with
Cisco Network Assistant, available on Cisco.com.
CLI—The Cisco IOS software supports desktop- and multilayer-switching features. You can access
the CLI by connecting your management station directly to the switch conso le p ort , by con ne cting
your PC directly to the Ethernet management port, or by usin g Telnet from a rem ote ma nage ment
station or PC. You can manage the switch stack by connecting to the console port or Ethernet
management port of any stack member. For more information about the CLI, see Chapter 2, “Using
the Command-Line Interface.”
SNMP—SNMP management applications such as CiscoWorks2000 LAN Management Suite (LMS)
and HP OpenView. You can manage from an SNMP-compatible management station or a PC that is
running platforms such as HP OpenView or SunNet Manager. The switch supports a comprehensive
set of MIB extensions and four remote monitoring (RMON) groups. For mor e i nf ormat ion a bout
using SNMP, see Chapter32, “Configuring SNMP.”
CNS—Cisco Networking Services is network management software that acts as a configuration
service for automating the deployment and management of ne twork devices a nd servi ces. You can
automate initial configurations and configuration updates by generating switch-specific
configuration changes, sending them to the switch, executing the configura tion change, and logging
the results.
For more information about CNS, see Chapter 4, “Con figuring Cisco IO S CNS Agen ts .”