38-36
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
Chapter38 Configuring IP Unicast Routing
Configuring EIGRP

Monitoring OSPF

You can display specific statistics such as the contents of IP routing tables, caches, and databases.
Table38-6 lists some of the privileged EXEC commands for displaying statistics. For more show ip ospf
database privileged EXEC command options and for explanations of fields in the resulting display, see
the Cisco IOS IP Command Reference, Volume 2 of 3: Routing Protocols, Release 12.2.
Configuring EIGRP
Enhanced IGRP (EIGRP) is a Cisco proprietary enhanced version of the IGRP. EIGRP uses the same
distance vector algorithm and distance information as IGRP; however, the convergence properties and
the operating efficiency of EIGRP are significantly improved.
The convergence technology employs an algorithm referred to as the Diffusing Update Algorithm
(DUAL), which guarantees loop-free operation at every instant throughout a rout e c om puta tion and
allows all devices involved in a topology change to synchronize at the same time. Routers that are not
affected by topology changes are not involved in recomputations.
IP EIGRP provides increased network width. With RIP, the largest possible width of your network is
15 ho ps. Beca use the EI GRP metric is l arge enough to support thousa nds of hops, the only barrie r to
expanding the network is the transport-layer hop counter. EIGRP increments the transport control field
only when an IP packet has traversed 15 routers and the next hop to the destination was learned throug h
EIGRP. When a RIP route is used as the next hop to the destination, the transport control field is
incremented as usual.
Table38-6 Show IP OSPF Statistics Commands
Command Purpose
show ip ospf [process-id] Display general information about OSPF routing
processes.
show ip ospf [process-id] database [router] [link-state-id]
show ip ospf [process-id] database [router] [self-originate]
show ip ospf [process-id] database [router] [adv-router [ip-address]]
show ip ospf [process-id] database [network] [link-state-id]
show ip ospf [process-id] database [summary] [link-state-id]
show ip ospf [process-id] database [asbr-summary] [link-state-id]
show ip ospf [process-id] database [external] [link-state-id]
show ip ospf [process-id area-id] database [database-summary]
Display lists of information related to the OSPF
database.
show ip ospf border-routes Display the internal OSPF routing ABR and ASBR
table entries.
show ip ospf interface [interface-name] Display OSPF-related interface information.
show ip ospf neighbor [interface-name] [neighbor-id] detail Display OSPF interface neighbor information.
show ip ospf virtual-links Display OSPF-related virtual links information.