Calling Features
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP) 59
Combine Calls Across Lines to Create a Conference
This task requires multiple phone lines.
1. Verify that you have two connected calls and that one of the calls is active (not on hold).
2. Press the Conference button .
3. Press the line button for the other (held) call.
The conference begins. (The conference is established on the line with the active call.)
Swap Between Calls Before Completing a Conference
After calling a new conference participant, but before adding the participant to the conference, press
the Swap softkey to toggle between the two calls. This allows you to consult privately with the party
or parties on each call before combining the calls into a conference.
End a Conference
The conference ends when all participants hang up.
View Conference Participants
While in a conference, press the Details softkey to view a list of the last 16 participants who have
joined the conference.
Remove Conference Participants
1. While in a conference, press the Details softkey to view a list of participants.
2. Highlight the participant that you want to remove, then press the Remove softkey.

Divert

Divert allows you to send an active or ringing call to your voicemail system or to a predetermined
phone number (set up by your system administrator).
Divert a Call
Press the Divert softkey to send an active, ringing, or held call to your voicemail system or to a
predetermined phone number (set up by your system administrator).