Speed-Dial Buttons—Allow you to quickly dial a phone number from one or more line buttons set up for speed dialing.

Speed-Dial Codes—Allow you to dial a phone number from a code (sometimes referred to as abbreviated dialing).

If your system administrator has set up the Line Status feature, you can monitor the status of a speed-dial line by using the line status indicators.

Related Topics

Speed Dial on the Web, page 77

Line Status Indicators, page 64

Place a Call with a Speed-Dial Button

(Before you can use speed-dial buttons on your phone, you must set up speed dial on your User Options Web pages.)

To place a call, press a speed-dial button .

Place a Call with a Speed-Dial Code

(Before you can use speed-dial codes on your phone, you must set up the codes on your User Options Web pages.)

To place a call, enter the speed-dial code and press the SpeedDial softkey.

Transfer

Transfer allows you to redirect a connected call from your phone to another number.

You can use Transfer or Direct Transfer:

Transfer allows you to redirect a single call to another number that you specify.

Direct Transfer allows you to connect two calls on two different lines to each other (without remaining on the line yourself).

Before completing a transfer procedure, you can press the Cancel softkey to cancel the procedure or you can press the Swap softkey to toggle between calls, allowing you to speak privately with

each party.

Transfer a Call to Another Number

1.Verify that you are on an active call (not on hold).

70

OL-23813-01

Page 80
Image 80
Cisco Systems 6921 manual Transfer, Place a Call with a Speed-Dial Button, Place a Call with a Speed-Dial Code