1-3
Cisco ASR 901 10G Series Aggregation Services Router Hardware Installation Guide
OL-28105-02
Chapter1 Introduction
Hardware Description
–
T1/E1 ports
–
Ethernet ports
–
SFP ports
–
Chassis: Single LED for multiple conditions
Figure 1-1 shows the front view of the CiscoASR 901 10G router (TDM version) with each interface
module.
Figure1-1 Cisco ASR901 10G Router—Front View of TDM Version
Cisco ASR 901 10G Router—Front View of Ethernet Version
The front panel of the Cisco ASR901 10G (Ethernet version) router has the following components:
•Two SFP+ connectors for optical 10G ports (positions 0 and 1)
•Eight SFP connectors for optical GE ports (positions 4, 5, 6, 7, 8, 9, 10, and 11)
•Eight RJ-45 connectors for copper Ethernet ports, labeled “GE” (positions 0, 1, 2, 3, 4, 5, 6, and 7)
•A single RJ-45 connector for management port, labeled “MGMT”
•A single RJ-45 connector for console, labeled “CONSOLE”
•A single RJ-45 jack for the BITS interface, labeled “BITS”
•A single RJ-45 jack for the ToD interface, labeled “ToD”

7

11 5

13 12 86

10

9

432

14

1
334524
1Power LED 8BITS port
210G SFP+ 9MINI-coax connector (10MHZ)
38 SFP ports 10 MINI-coax connector (1PPS)
48 GE port 11 USB port
5Management port 12 Alarm
6Console port 13 8 T1/E1 ports
7ToD po rt 14 Power connector (DC or AC)