Chapter 3 Installing the Cisco ASR 901 10G Router
Mounting the Cisco ASR 901 10G Router
Installing the AC Power Cord Retainer
Complete the following steps to install the AC power cord retainer to the Cisco ASR 901 10G router using the corresponding mounting point.
Step 1 Choose the sleeve size of the power cord retainer based on the thickness of the cord. The smaller sleeve can be snapped off and used for thin cords. See Figure
Step 2 Slide the retainer around the AC power cord, and pass it around the lanced loop on the router. See Figure
Figure 3-13 Inserting the Retainer through the Lanced Loop
334520
| 4 |
| 3 | 2 | 1 |
|
|
|
| ||
1 | AC power cord | 2 | Power cord retainer | ||
|
|
|
|
|
|
3 | Sleeve for thinner power cords | 4 | Loop |
|
|
|
|
|
|
|
|
Step 3 Slide the retainer through the first latch. See Figure
Figure 3-14 Sliding the Retainer Through the Latch
334522
3 | 2 | 1 |
|
| Cisco ASR 901 10G Series Aggregation Services Router Hardware Installation Guide |
|
| |
|
|
| |||
|
|
|
| ||
|
|
|
| ||
