Cisco Systems Dial NMS manual About Enabling Snmp, ` Ucd-Snmp

Task 1—Enabling SNMP in a Cisco IOS Device

About Enabling SNMP

In this case study:

•Each Cisco IOS device is identified by a fixed and stable loopback IP address for network management purposes. The IP address functions as an device ID.

One block of loopback IP addresses is used to simplify IP-security filtering at the NOC. This technique protects the NOC from devices that should not access management services, such as TACACS+, RADIUS, syslog, and SNMP.

•The dial NMS environment interfaces with SNMP through these applications:

`UCD-SNMP

`SNMP Commander

`Multi-Router Traffic Grapher (MRTG)

`HP OpenView (HPOV)

`Cisco Works 2000 Resource Manager Essentials (CW2000 RME)

Caution Avoid using well-known community strings, such as “public,” “private,” or “cisco.” These strings are easily guessed and leave your device open to malicious attacks or inadvertent access. To further enhance SNMP security, apply access lists to the community strings.

Basic Dial NMS Implementation Guide

"￿