Networking
Configuring Quality of Service
Cisco ISA500 Series Integrated Security Appliances Administration Guide 160
4
NOTE: Traffic that matches the above settings will be classified to a class for
management purposes.
STEP 4 Click Save to apply your settings.
Configuring WAN QoS Policy Profiles
Use the QoS Policy Profile page to configure class-based policy profiles for
managing traffic through the WAN interfaces.
NOTE Up to 32 WAN QoS policy profiles can be configured on the security appliance.
STEP 1 Click Net working > QoS > WAN QoS > QoS Policy Profile.
STEP 2 To add a new WAN QoS policy profile, click Add.
Other options: To edit an entry, click the Edit (pencil) icon. To delete an entry, click
the Delete (x) icon.
The QoS Policy - Add/Edit window opens.
STEP 3 Enter the following information:
•Policy Name: Enter the name for the WAN QoS policy profile.
•Apply this policy to: Click Inbound Traffic to apply this policy profile for
inbound traffic, or click Outbound Traffic to apply this policy profile for
outbound traffic.
STEP 4 Specify the QoS settings for the traffic classes that you want to associate with the
policy profile. For complete details, see Configuring WAN QoS Class Rules,
page160.
STEP 5 Click OK to save your settings.
STEP 6 Click Save to apply your settings.
Configuring WAN QoS Class Rules
This section describes how to configure the QoS class rules that you want to
associate with the WAN QoS policy profile.
NOTE Up to 64 traffic classes can be associated with one WAN QoS policy profile.