Configuration Wizards
Using the Wireless Wizard (for ISA550W and ISA570W only)
Cisco ISA500 Series Integrated Security Appliances Administration Guide 79
2
STEP 2 In the Security Settings area, specify the wireless security settings.
•Security Mode: Choose the security mode and configure the
corresponding security settings. For security purposes, we strongly
recommend that you use WPA2 for wireless security. For example, if you
choose WPA2-Personal, enter the following information:
-Encryption: WPA2-Personal always uses AES for data encryption.
-Shared Secret: The Pre-shared Key (PSK) is the shared secret key for
WPA. Enter a string of at least 8 characters to a maximum of 63
characters.
-Key Renewa l Timeout: Enter a value to set the interval at which the key
is refreshed for clients associated to this SSID. A value of zero (0)
indicates that the key is not refreshed. The default is 3600 seconds.
NOTE: For information on configuring other security modes, see
Configuring Wireless Security, page 211.
STEP 3 In the Advanced Settings area, enter the following information:
•VLAN Mapping: Choose the VLAN to which the SSID is mapped. All traffic
from the wireless clients that are connected to this SSID will be directed to
the selected VLAN. For Intranet VLAN access, you must choose a VLAN that
is mapped to a trusted zone.
•User Limit: Specify the maximum number of users that can simultaneously
connect to this SSID. Enter a value in the range of 0 to 200. The default value
is zero (0), which indicates that there is no limit for this SSID.
NOTE: The maximum number of users that can simultaneously connect to all
enabled SSIDs is 200.