Wireless (for ISA550W and ISA570W only)
Configuring SSID Profiles
Cisco ISA500 Series Integrated Security Appliances Administration Guide 211
5
This section describes how to configure the security mode for the SSID. All
devices on this network must use the same security mode and settings to work
correctly. Cisco recommends using the highest level of security that is supported
by the devices in your network.
NOTE If th e sec uri ty m ode i s set as W EP or as WPA w ith TKIP encr ypt ion algo rith m for the
SSID that supports 802.11n, the transmit rate for its associated client stations will
not exceed 54 Mbps.
STEP 1 Click Wireless > B asic Settings.
STEP 2 In the SSIDs area, click the Edit (pencil) icon to edit the settings for the SSID.
The SSID - Edit window opens.
STEP 3 In the Security Mode tab, specify the following information:
•SSID Name: The name of the SSID on which the security settings are
applied.
•User Limit: Specify the maximum number of users that can simultaneously
connect to this SSID. Enter a value in the range 0 to 200. The value of zero (0)
indicates that there is no limit for this SSID.
NOTE: The maximum number of users that can simultaneously connect to all
enabled SSIDs is 200.
•Security Mode: Choose the type of security.
Security Mode D escription
Open Any wireless device that is in range can connect to the
SSID. This is the default setting but not recommended.