Networking
Address Management
Cisco ISA500 Series Integrated Security Appliances Administration Guide 175
4
Use the Address Management page to manage the address and address group
objects. The security appliance is configured with a long list of common address
objects so that you can use to configure firewall rules, port forwarding rules, or
other features. See Default Address Objects, page 478.
Refer to the foll owing to pics:
•Configuring Addresses, page 175
•Configuring Address Groups, page 176
Configuring Addresses
STEP 1 Click Networking > A ddress Management.
STEP 2 In the Address Objects area, click Add Address to add a new address object.
Other options: To edit an entry, click the Edit (pencil) icon. To delete an entry, click
the Delete (x) icon. To delete multiple entries, check them and click Delete. The
default address objects cannot be edited and deleted.
The Address Object - Add/Edit window opens.
STEP 3 Enter the following information:
•Name: Enter the name for the address object.
•Type: Specify the address type and enter the corresponding information.
-Host: Defines a single host by its IP address. The netmask for a Host
address object will automatically be set to 32-bit (255.255.255.255) to
identify it as a single host. If you choose Host, enter the IP address of the
host in the IP Address field.
-Range: Defines a range of contiguous IP addresses. No netmask is
associated with the Range address object, but internal logic generally
treats each member of the specified range as a 32-bit masked host
object. If you choose Range, enter the starting IP address in the Starting
IP Address field and the ending IP address in the Ending IP Address
field.