Configuration Wizards
Using the Setup Wizard for the Initial Configuration
Cisco ISA500 Series Integrated Security Appliances Administration Guide 47
2
For example, you host an RDP server (192.168.12.101) on the DMZ. Your ISP
has provided a static IP address (172.39.202.102) that you want to expose to
the public as your RDP server address. You can create a DMZ service as
follows to allow Internet user to access the RDP server by using the
specified public IP address.
NOTE: In this example, you must manually create two address objects (RDPServer
and PublicIP) and a TCP service object with the port 3389 called “RDP.”
STEP 35 Click OK to save your settings.
STEP 36 After you are finished, click Next.
Configuring Wireless Radio Settings
STEP 37 If you are using the ISA550 or ISA570, proceed to Viewing Configuration
Summary, page 50. If you are using the ISA550W or ISA570W, use the Wireless
Radio Setting page to configure the wireless radio settings.
•Wireless Radio: Click On to turn wireless radio on and hence enable the
SSID called “cisco-data,” or click Off to turn wireless radio off.
•Wireless Network Mode: Choose the 802.11 modulation technique.
-802.11b/g mixed: Choose this mode if some devices in the wireless
network use 802.11b and others use 802.11g. Both 802.11b and 802.11g
clients can connect to the access point.
-802.11g/n mixed: Choose this mode if some devices in the wireless
network use 802.11g and others use 802.11n Both 802.11g and 802.11n
clients can connect to the access point.
Original Service RDP
Translat ed Serv ice RDP
Translat ed IP RDPServer
WAN WAN1
WAN IP PublicIP
Enable DMZ Service On
Create Firewall Rule On