User Management
Configuring Users and User Groups
Cisco ISA500 Series Integrated Security Appliances Administration Guide 392
9
STEP 3 In the Group Settings tab, enter the following information:
•Name: Enter the name for the user group.
•Services: Specify the service policy for the user group. You can enable
multiple services for a user group.
-Web Login: Choose one of the following web login policies for the user
group.
Disable: All members of the user group cannot log into the Configuration
Utility through the web browser.
Read Only: All members of the user group can only read the system
status after they login. They cannot edit any configuration.
Administrator: All members of the user group have full privilege to set
the configuration and read the system status.
NOTE: You cannot disable the web login service or change its service
level for the default user group (“admin”).
-SSL VPN: Choose a SSL VPN group policy to enable the SSL VPN
service for the user group, or choose Disable to disable it. If you enable
SSL VPN, all members of the user group can establish the SSL VPN
tunnels based on the selected SSL VPN group policy to securely access
your network resources. For more information about the SSL VPN group
policy, see Configuring SSL VPN Group Policies, page379.
-IPsec Remote Access: Click Enable to enable the IPsec Remote Access
service for the user group, or click Disable to disable it. If you enable
IPsec Remote Access, all members of the user group can establish the
VPN tunnels to securely access your network resources.
-Captive Portal: Click Enable to enable the Captive Portal service for the
user group, or click Disable to disable it. If you enable Captive Portal, the
members of the user group will be directed to a specified web page
(portal) before they can access the Internet. To configure Captive Portal,
see Configuring Captive Portal, page 221,.
STEP 4 In the Membership tab, specif y the members of the user group.
• To add a member, select an existing user from the Use r list and click the right
arrow. The members of the user group appear in the Membership list.
• To delete a member from the user group, select the user from the
Membership list and click the left arrow.