Device Management
Log Managem ent
Cisco ISA500 Series Integrated Security Appliances Administration Guide 447
10
Use the Log Facilities page to specify which system messages are logged based
on the facility and determine where to save the syslogs and whether to send the
syslogs to a specified email address on schedule.
NOTE Before you configure the log facilities, make sure that you enable the Log feature,
set the log buffer size, and specify the Email Alert, Remote Log, and Local Log
settings. See Configuring Log Settings, page 444.
STEP 1 Click Device Man agement > Logs > Logs Facilities.
The Log Facilities window opens. All supported facilities are listed in the table.
STEP 2 Specify the following information:
•Email Alert: Check Email Alert to enable the email alert settings for all
facilities, or check the box for a facility to enable the email alert settings for
the selected facility.
The events that belong to the selected facilities and match the specified
severity level for Syslog Email are logged and the recorded syslogs are sent
to the specified email address on schedule.
•Remote Log: Check Remote Log to enable the remote log settings for all
facilities, or check the box of a facility to enable the remote log settings for
the selected facility.
The events that belong to the selected facilities and match the specified
severity level for Remote Logs are logged and the recorded syslogs are
saved to the specified remote syslog server.
•Local Log: Check Local Log to enable the local log set tings for all facilities,
or check the box of a facility to enable the local log settings for the selected
facility.
The events that belong to the selected facilities and match the specified
severity level for Local Log are logged and the recorded syslogs are saved
to the local syslog daemon.
NOTE: For information on configuring the Email Alert, Remote Log, and Local
Log settings, see Configuring Log Settings, page 444.
STEP 3 Click Save to apply your settings.