Device Management
Configuring Schedules
Cisco ISA500 Series Integrated Security Appliances Administration Guide 449
10

Rebooting the Security Appli ance

To reboot the security appliance, you can press and release the RESET button on
the back panel for less than 3 seconds, or perform the Reboot operation from the
Configuration Utility.
STEP 1 Click Device Management > Reboot/Reset.
The Reboot/Reset window opens.
STEP 2 In the Reboot Device area, click Reb oot.
A warning message appears saying “Preparing to reboot. Do you want to
continue? WARNING: All current sessions will be closed and the system will be
down for approximately 180 seconds.”
STEP 3 Click Ye s to reboot the security appliance.
Configuring Schedules
The schedule specifies when the firewall rule or the application control policy is
active. For example, if you want a firewall rule only to work on the weekend, you
can create a schedule called “Weekend” that is only active on Saturday and
Sunday.
STEP 1 Click Device Management > Schedules.
The Schedules window opens.
STEP 2 To create a new schedule, click Add.
Other options: To edit an entry, click the Edit (pencil) icon. To delete an entry, click
the Delete (x) icon. To delete multiple entries, check them and click Delete.
The Schedule - Add/Edit window opens.
STEP 3 Enter the following information:
•Schedule Name: Enter the name for the schedule.