User Management
Configuring User Authentication Settings
Cisco ISA500 Series Integrated Security Appliances Administration Guide 396
9
In the above table, if the User1 in the RADIUS server belongs to the
Group1 but the User1 in the local database belongs to the Group2, then
the User1 will belong to the Group1 after the user passes the R ADIUS
authentication. If the User1 in the RADIUS server belongs to the Group3
but the local database has not the Group3, then the User1 will be set to
the specified default group.
-Local Configuration Only: Find the user group information from the local
database only.
For example, the RADIUS server has three user groups (Group1, Group2,
and Group3) and the local database has two user groups (Group1 and
Group2). The following table displays the user group membership
settings.
In the above table, if the User1 in the RADIUS server belongs to the
Group1 but the User1 in the local database belongs to the Group2, then
the User1 will belong to the Group2 after the user passes the RADIUS
authentication. If the User1 does not exist in the local database, it will be
set to the specified default group.
User1 in
Group1
Group1 Group2 Default Group
User1 in
Group2
Group1 Group2 Default Group
User1 does not
exist
Group1 Group2 Default Group
Local
Database
Settings
RADIUS Server Settings
User1 in
Group1
User1 in
Group2
User1 in
Group3
User1 in
Group1
Group1 Group1 Group1
User1 in
Group2
Group2 Group2 Group2
User1 does not
exist
Default Group Default Group Default Group