Wireless (for ISA550W and ISA570W only)
Configuring SSID Profiles
Cisco ISA500 Series Integrated Security Appliances Administration Guide 216
5
-Secondary RADIUS Server Shared Secret: The shared secret key of
the secondary RADIUS server.
NOTE: You can change the settings in the above fields but the RADIUS
server settings you specify will replace the default settings of the
selected group. To maintain the RADIUS servers, go to the Users >
RADIUS Servers page. See Configuring RADIUS Servers, page 401.
STEP 10 If you choose WPA2-Enterprise as the security mode, enter the following
information:
Encryption: Always use AES encryption algorithm for data encryption.
Key Renewa l Timeout: Enter a value to set the interval at which the key is
refreshed for clients associated to this SSID. The valid range is 0 to 4194303
seconds. A value of zero (0) indicates that the key is not refreshed. The
default value is 3600 seconds.
RADIUS Server ID: Choose an existing RADIUS group for client
authentication. The RADIUS server settings of the selected group are
displayed. You can change the RADIUS server settings but the settings you
specify will replace the default settings of the selected group. To maintain
the RADIUS servers, go to the Users > RADIUS Ser vers page. See
Configuring RADIUS Servers, page 401.
STEP 11 If you choose WPA/WPA2-Enterprise Mixed as the security mode, enter the
follow ing info rmation :
Encryption: Automatically choose TKIP or AES encryption algorithm for data
encryption.
Key Renewa l Timeout: Enter a value to set the interval at which the key is
refreshed for clients associated to this SSID. The valid range is 0 to 4194303
seconds. A value of zero (0) indicates that the key is not refreshed. The
default value is 3600 seconds.
RADIUS Server ID: Choose an existing RADIUS group for client
authentication. The RADIUS server settings of the selected group are
displayed. You can change the RADIUS server settings but the settings you
specify will replace the default settings of the selected group. To maintain
the RADIUS servers, go to the Users > RADIUS Ser vers page. See
Configuring RADIUS Servers, page 401.
STEP 12 If you choose RADIUS as the security mode, choose an existing RADIUS group for
client authentication from the RADIUS Server ID drop-down list. The RADIUS
server settings of the selected group are displayed. You can change the RADIUS
server settings but the settings you specif y will replace the default settings of the