Firewall
Firewall and NAT Rule Configuration Examples
Cisco ISA500 Series Integrated Security Appliances Administration Guide 277
6
STEP 4 Or go to the Firewall > NAT > Advanced NAT page to create an advanced NAT rule
as follows.
STEP 5 Then go to the Firewall > Access Control > ACL Rules page to create a firewall rule
as follows to allow access:
NOTE When you create the port forwarding rule, you can check Create Firewall
Rule to automatically generate the firewall rule.
Solution 2: For this use case, you can use the DMZ Wizard to complete the
configuration.
From WAN1
To DMZ
Original Source
Address
ANY
Original Destination
Address
PublicIP
Original Services RDP
Translat ed Sourc e
Address
ANY
Translat ed
Destination Address
RDPServer
Translated Services RDP
From Zone WAN
To Z one DMZ
Services RDP
Source Address ANY
Destination Address RDPServer
Match Action Permit