VPN
Configuring IPsec Remote Access
Cisco ISA500 Series Integrated Security Appliances Administration Guide 361
8
NOTE: An address object with the range 192.168.3.2 to 192.168.3.254 called
“EZVPN_VPNGroup1” will be automatically created.
STEP 2 If only a single WAN interface is configured, go to the Firewall > NAT > Advanced
NAT page to create an advanced NAT rule as follows.
STEP 3 If two WAN interfaces are configured, go to the Firewall > NAT > Advanced NAT
page to create two advanced NAT rules as follows.
Mode Client
Pool Range for Client
LAN
Start IP: 192.168.3.2
End IP: 192.168.3.254
Client Internet
Access
Disable
WAN Fai lover On
Field Setting
Field Setting
Name VPNClient_to_WAN1
Enable On
From Any
To WAN1
Original Source
Address
EZVPN_VPNGroup1
Original Destination
Address
Any
Original Services Any
Translat ed Sourc e
Address
WAN1_ IP
Translat ed
Destination Address
Any
Translated Services Any