Configuration Wizards
Using the Remote Access VPN Wizard
Cisco ISA500 Series Integrated Security Appliances Administration Guide 55
2
•Configuring WAN Settings, page 56
•Configuring Operation Mode, page 56
•Configuring Access Control Set tings, page 57
•Configuring DNS and WINS Settings, page 57
•Configuring Backup Servers, page 58
•Configuring Split Tunneling, page 58
•Viewing Group Policy Summary, page 58
•Configuring IPsec Remote Access User Group s, page 59
•Viewing IPsec Remote Access Summar y, page59
Starting the Remote Access VPN WizardSTEP 1 Click Configuration Wizards > Remote Access VPN Wizard.
STEP 2 On the Getting Started page, choose IPsec Remote Access from the VPN Tunnel
Type drop-down list.
STEP 3 Click Next.
Configuring IPsec Remote Access Group PolicySTEP 4 Use the IPsec Group Policy page to configure the following parameters of the
IPsec Remote Access group policy:
•Group Name: Enter the name for the group policy.
•IKE Authentication Method: Specify the authentication method.
-Pre-shared Key: Uses a simple, password-based key to authenticate. If
you choose this option, enter the desired value that remote VPN clients
must provide to establish the VPN connections. The pre-shared key must
be entered exactly the same here and on remote VPN clients.
-Certificate: Uses the digital certificate from a third party Certificate
Authority (CA) to authenticate. If you choose this option, select a CA
certificate as the local certificate from the Local Certificate drop-down
list and select a CA certificate as the remote certificate from the Peer
Certificate drop-down list for authentication. The selected remote
certificate on the IPsec VPN server must be set as the local certificate on
remote VPN c lients.