Firewall
Configuring NAT Rules to Securely Access a Remote Network
Cisco ISA500 Series Integrated Security Appliances Administration Guide 263
6
If there is a conflict between advanced NAT, static NAT, or port forwarding rules,
the security appliance will process the rules as described below.
Inbound Traffic
For an inbound packet, the security appliance will perform NAT before a
forwarding decision is made and will use the following order of precedence for the
various types of rules:
1. Adva nce d NAT
2. Static NAT
3. Port Forwarding
4. Port Triggering
Outbound Traffic
For an outbound packet, the security appliance will perform NAT after a
forwarding decision is made and will use the following order of precedence for
various types of rules.
1. Adva nce d NAT
2. Static NAT
3. Dynamic PAT
Tra nsl at ed S ou rce
Address
IP address that the specified original source address is
translated to.
Translated Destination
Port
Interface that the specified destination interface is
translated to.
Tra nsl at ed S ou rce
Port
Interface that the specified source interface is
translated to.
Tx Packets Number of transmitted packets.
Rx Packets Number of received packets.
Tx Bytes/Sec Volume in bytes of transmitted traffic.
Rx Bytes/Sec Volume in bytes of received traffic.
Field Des cription