Configuration Wizards
Using the Dual WAN Wizard to Configure WAN Redundancy Settings
Cisco ISA500 Series Integrated Security Appliances Administration Guide 51
2
If you have two ISP links, a backup WAN is required so that you can provide
backup connectivity or load balancing. Use the Dual WAN Wizard to configure the
WAN redundancy settings. Refer to the following steps:
•Starting the Dual WAN Wizard, page 51
•Configuring a Configurable Port as a Secondary WAN Port, page 51
•Configuring the Primary WAN, page 52
•Configuring the Secondary WAN, page 52
•Configuring WAN Redundancy, page 52
•Configuring Network Failure Detection, page 53
•Viewing Configuration Summary, page 54
Starting the Dual WAN Wizard
STEP 1 Click Configuration Wizards > Dual WAN Wizard.
STEP 2 Click Next.
Configuring a Configurable Port as a Secondar y WAN Port
STEP 3 On the Port Configuration page, specify a configurable port (from GE6 to GE10) as
the secondary WAN port. The physical port GE1 is reserved for the primary WAN
port.
STEP 4 After you are finished, click Next.