Security Services
Configuring Anti-Virus
Cisco ISA500 Series Integrated Security Appliances Administration Guide 308
7
NOTE: The above email server settings are read only. They are used to send
the alert email to the original email receiver. You can click the Edit link to
configure the email server settings, but save your settings on this page first.
See Configuring Email Alert Settings, page 408.
STEP 2 If the Email Notification feature is enabled and the email server settings are
configured, enter the following information:
•Mail Tag: Enter the tag that shows in the alert email’s subject. The tag will
insert to the alert email subject in the [Tag] Email Subject format .
•Mail Content: Enter the notification content that appears in the alert email.
STEP 3 Click Save to apply your settings.
Updating Anti-Virus Signatures
You can automatically check for Anti-Virus signature updates from Cisco’s
signature server every 24 hours or to manually check for Anti-Virus signature
updates at any time by clicking Update. When a newer signature file is available
on the server, the new signature file will be downloaded to your device.
NOTE A valid Cisco.com account is required to check for signature updates from Cisco’s
signature server. Go to the Device Management > Cisco Services & Support >
Cisco.com Account page or click the Edit Cisco.com Account Settings link to
configure your Cisco.com account credentials on the security appliance. See
Configuring Cisco.com Account, page 424.
STEP 1 Click Se curity Services > Anti-Virus > General Settings.
STEP 2 In the Update Virus Database area, you can view the status of the Anti-Virus
signature file. The following information is displayed:
•Last Check: The date and time of your last check.
•Last Update: The date and time of the last successful update.
•Versio n: The version number of the Anti-Virus signature file.
•Virus Pattern Number: The total amount of virus patterns in the Anti-Virus
signature file.