Cisco Systems ISA550 Using Remote Access VPN Wizard for SSL Remote Acc ess

Configuration Wizards

Using the Remote Access VPN Wizard

Cisco ISA500 Series Integrated Security Appliances Administration Guide 60

After the settings are saved, the security appliance is set as an IPsec VPN server.

Remote users that belong to the specified user groups can use the specified

group policy to establish the VPN connections. If you check Client Internet

Access, the corresponding advanced NAT rules are automatically created to allow

remote VPN clients to access the Internet over the VPN tunnels.

Using Remote Access VPN Wizard for SSL Remote Acc ess

This section describes how to use the Remote Access VPN Wizard to configure

the SSL VPN group policies and specify the users and user groups for SSL remote

acce ss. Refe r to the fo llowin g steps :

•Starting the Remote Access VPN Wizard with SSL Remote Acc ess,

page 60

•Configuring SSL VPN Gateway, page 60

•Configuring SSL VPN Group Policy, page 62

•Configuring SSL VPN User Groups, page 65

•Viewing SSL VPN Summary, page 66

STEP 1 Click Configuration Wizards > Remote Access VPN Wizard.

STEP 2 Choose SSL Remote Access from the VPN Tunnel Type drop-down list.

STEP 3 Click Next.

STEP 4 Use the SSL VPN - Configuration page to configure the SSL VPN gateway

settings.

STEP 5 In the Gateway (Basic) area, enter the following information:

•Gateway Interface: Choose the WAN port that traffic passes through the

SSL VPN tunnel.

•Gateway Port: Enter the port number used for the SSL VPN gateway. By

default, SSL operates on port 443. However, the SSL VPN gateway should

be flexible enough to operate on a user defined port. The firewall should