VPN
Configuring SSL VPN
Cisco ISA500 Series Integrated Security Appliances Administration Guide 372
8
• If you want to immediately activate the connection after the settings are
saved, click the Activate Connection button. When you create multiple
Teleworker VPN Client group policies at a time, only one connection can be
active after you save your settings. The security appliance will use the group
policy that was last created or edited to initiate the VPN connection.
• If you only want to create the Teleworker VPN client group policy and do not
want to immediately activate the connection after the settings are saved,
click the Do Not Activate button. You can click the Connect icon to man uall y
establish the VPN connection.
NOTE: This feature is different from the Active Connection on Startup
feature. It is used to activate the connection immediately after the settings
are saved, but the Activate Connection on Startup feature is used to activate
the connection when the security appliance starts up.
STEP 8 Click Save to apply your settings.
Configuring SSL VPN
SSL VPN is a flexible and secure way to extend network resources to virtually any
remote user. The security appliance supports the SSL VPN feature, and
interoperates with the Cisco AnyConnect Secure Mobility Client software.
A valid security license is required to support SSLVPN with mobile devices such
as smart phones and tablets. For more information, see Activating Security
Services, page 293.
Figure 9 shows an example of SSL VPN. Users can remotely access the network
by using the Cisco AnyConnect Secure Mobility Client software. When the SSL
VPN tunnel is established, each user will have an IP address on the internal
network.