Device Management
Managing Security License
Cisco ISA500 Series Integrated Security Appliances Administration Guide 441
10
and configure the email server settings. See Configuring Email Alert Set tings,
page 408.
Installing or Renewing Security License
This section describes how to install the security license or renew the security
license before it expires. A valid security license is required to activate security
services and to support SSLVPN with mobile devices such as smart phones and
tablets.
NOTE You can also validate the security license by using the Setup Wizard. See Valida ting
Security License, page 39.
STEP 1 Contact your Cisco reseller to purchase a license. The series number, PID, and UDI
of your device are required to apply for a license. You can find these information
from the Status > Dashboard page or from the Device Management > License
Management page.
STEP 2 Log in to the Configuration Utility.
STEP 3 Click Device Management > License Management.
STEP 4 To install the security license, click the Install icon. Other option: If the security
license is installed, you can click the Renew icon to renew the security license
before it expires. Choose the license type from the License Type drop-down list:
•License Code (PAK) from Cisco.com: Automatically retrieves and installs
the license on the security appliance from the Cisco server. If you choose
this option, enter the following information. These credentials are required
for the security appliance to authenticate to the Cisco server.
-License Code: Enter the license code (PAK).
-Cisco.com Login: Enter the username of your Cisco.com account.
-Cisco.com Password: Enter the password of your Cisco.com account.
-Email Address: Enter the registered email address to receive the PAK.
•License File download from Cisco.com: Installs a security license that was
previously downloaded to your PC. If you choose this option, click Browse
to locate and select the license file from your PC.
NOTE: Make sure that the security appliance is set to the current time, or the
license will not install properly. See Configuring System Time, page 427.