Device Management
Administration
Cisco ISA500 Series Integrated Security Appliances Administration Guide 409
10
• DNS resolution of the Security Services application server name fails
because the server is offline.
STEP 1 Click Device Management > Administration > Email Alert.
STEP 2 In the Email Server area, specif y the SMTP email server that is used to send the
alert emails.
•SMTP Server: Enter the IP address or Internet name of the SMTP server.
•Port: Enter the port for SMTP communication. The valid range of port
numbers is 1~65535.
- If you enter por t 25 (the default setting), you can choose TLS (Transport
Layer Security) or SSL (Secure Sockets Layer) for securing the SMTP
communication, or choose None for an unsecured connection.
- If you enter por t 465, you can choose either TLS or SSL for securing the
SMTP communication.
- If you enter por t 587, you can choose either TLS or SS L for securing the
SMTP communication.
•Secure Connectivity Method: Choos e either TLS or SSL for secur ing the
SMTP communication, or choose None for an unsecured connection. If you
choose TLS or SSL, SMTP Authentication will be enabled.
•SMTP Authentication: Click On if the SMTP server requires authentication
before accepting the connections. Users must provide the SMTP account
credentials for authentication.
•Account: Enter the username of the SMTP email account.
•Password: Enter the password of the SMTP email account.
•From Email Address: Enter the email address to send the alert emails.
•To E mai l A dd res s: Enter the email address to receive the alert emails. This
email address is used to receive all alert emails for all events. If you want to
send the alert emails that belong to different events to different email
addresses, uncheck All Alerts and then specify the email address for each
event individually.
STEP 3 To verify the settings, click the Tes t Co nn ec tiv it y t o Em ai l Se rv er. The results
appear in a pop-up window.