Cisco Systems OL-19470-01 manual 13-33

Chapter 13 Generating Audio Phone and Video Phone Reports

Using Video Phones Reports

GUI Element	Description/Action
SRST radio buttons	Select one:
	• SRST—Configured to fail over to an SRST router in case of a WAN link
		failure.
	• Non-SRST—Not configured for SRST.
	• All—SRST and non-SRST.
Protocol radio	Select one:
buttons	• SCCP—Phones using Skinny Client Control Protocol.
	• SIP—Phones using Session Initiation Protocol.
	•	All—SCCP and SIP.
Video Phone Type	Enter a comma-separated list of phone models. By default, all supported phone
field	models are included in this field. Edit the entries in the field directly or select
	from a list of phone models, as follows:
	1.	Click	. The Select Video Phone Models list appears.
	2. Select the desired video phone models from the list. (Use the Control key
		or the Shift key to select more than one video phone model from the list.)
	3.	Click OK.
CCM/CCM Cluster/	• Exclude check box—Deselected by default. Select to exclude phones that
CME pane		belong to any Cisco Unified Communications Manager, Cisco Unified
		Communications Manager cluster, and Cisco Unified Communications
		Manager Express in the list box.
	• List box—Enter a comma-separated list of Cisco Unified Communications
		Managers, Cisco Unified Communications Manager clusters, and instances
		of Cisco Unified Communications Manager Express, or select them as
		follows:
		1. Click	. The Select CCM/CCM Cluster/CME dialog box
		appears.
		2. In the CCM/CCM Cluster/CME Selector, expand groups and select one
		or more of the following: Cisco Unified Communications Manager,
		Cisco Unified Communications Manager Cluster, and Cisco Unified
		Communications Manager Express.
		3. Click OK. The dialog box closes and the Find Video Phones screen
		displays your selections in the CCM/CCM Cluster/CME list box.

	User Guide for Cisco Unified Operations Manager
OL-19470-01		13-33