Cisco Systems OL-19470-01 manual Filtering a Video Phones Report, 13-40

Chapter 13 Generating Audio Phone and Video Phone Reports

Using Video Phones Reports

Table 13-10	Video Phone Reports (continued)
Columns and Buttons		Description/Action
Switch Address		IP address of the switch to which the video phone is connected.
Port		Switch port used by the video phone; for example, Fa0/12.
Port Status		Status of the port used by the video phone: up or down.
VLAN Name		Name of the VLAN (user-defined name); for example, voice.
VLAN ID		ID of the VLAN for the video phone; for example, 100.
SRST Mode		One of the following:
		• yes—The phone is in SRST mode.
		• no—The phone is not in SRST mode.
		• ?—The phone is suspected to be in SRST mode.
		• —(dash)—The phone is not an SRST phone.
SRST Router		One of the following:
		• IP address of the router that the phone is using for SRST.
		• —(dash).
Serial No.		IP phone serial number.
		Note This information is obtained by phone polling. See Understanding
		Phone Polling, page 13-28.
Application ID		Identifier of the firmware running on the phone.
		Note This information is obtained by phone polling. See Understanding
		Phone Polling, page 13-28.
Load ID		Identifier of the factory-installed load running on the phone.
		Note This information is obtained by phone polling. See Understanding
		Phone Polling, page 13-28.
Launch button		Click and select a menu item to configure tests for the video phones
		selected on this report.

For more information, see the following topic:

•Troubleshooting Tips for Audio Phones and Applications Reports and Video Phones Reports, page 13-19

Filtering a Video Phones Report

From a Video Phones report, click the Filter button when present. A filter dialog box opens.

Note Filtering is performed using:

•An implicit “or” within each field—If you enter more than one value in a field, phones that match any value are included in the report.

•An implicit “and” for all fields—If you enter values in more than one field, phones that match at least one value from each field are included in the report after filtering.

	User Guide for Cisco Unified Operations Manager
13-40	OL-19470-01