Cisco Systems OL-19470-01 manual Using the Video Phone Audit Report, 13-44

Chapter 13 Generating Audio Phone and Video Phone Reports

Using Video Phones Reports

Column	Description
Extension	Extension number of the video phone. The Extension column has two
	subcolumns—Old and New:
	• Old—Extension number of the video phone before it was moved.
	• New—Extension number of the video phone after it was moved.
IP Address	IP address of the video phone.
MAC Address	MAC address of the video phone.
CCM Address	Cisco Unified Communications Manager address. The CCM Address column
	has two subcolumns:
	• Old—CCM address of the video phone before it was moved.
	• New—CCM address of the video phone after it was moved.
Switch Address	IP address of the switch to which the video phone is connected. The Switch
	Address column has two subcolumns:
	• Old—Switch address used by the video phone before it was moved.
	• New—Switch address used by the video phone after it was moved.
Switch Port	Switch port used by the video phone. The Switch Port column has two
	subcolumns:
	• Old—Switch port used by the video phone before it was moved.
	• New—Switch port used by the video phone after it was moved.
Time Stamp	Reflects the date and time that Operations Manager detected the video phone
	move.

Tip Phones that have moved and do not run Cisco Discovery Protocol (CDP) do not appear in this report. For example, 30VIP and 12SP+ do not run CDP; you will not see move entries for them.

Using the Video Phone Audit Report

The Video Phone Audit report shows the changes that have occurred in the managed video phone network. For example, this report shows you the video phones that have been added to or deleted from your network, or changes in video phone status. Phone status changes occur, for instance, when a phone becomes unregistered with the Cisco Unified Communications Manager.

You can see what has changed within the last 30 days. Audits are maintained in the database for a period of 30 days, after which they are purged.

Information for the Video Phone Audit report is gathered by IP Phone Movement Tracking (see Understanding IP Phone Movement Tracking, page 13-28). IP Phone Movement Tracking runs every 5 minutes, so you can run the Video Phone Audit Detail report and obtain fresh data about once every 5 minutes. This interval is not configurable.

Step 1 Select Reports > Video Phones > Video Phone Audit. The Video Phone Status Reports page appears.

	User Guide for Cisco Unified Operations Manager
13-44	OL-19470-01