Chapter 13 Generating Audio Phone and Video Phone Reports

Using Video Phones Reports

Table 13-8

All Video Phones/Lines Report

 

 

Protocol

Protocol the phone is using to communicate with Cisco Unified Communications

 

Manager or Cisco Unified Communications Manager Express.

 

Note Only SCCP and SIP phones will be discovered. H.323 and MGCP protocols are

 

not currently supported.

 

 

Regd.

Registration status of the video phone with respect to Cisco Unified Communications

 

Manager or Cisco Unified Communications Manager Express. Displays yes if the video

 

phone is registered or no if the video phone is not registered.

 

 

CCM

One of the following:

 

CCM—Cisco Unified Communications Manager

 

CCE—Cisco Unified Communications Manager Express

 

 

CCM/CME

DNS name of the Cisco Unified Communications Manager or Cisco Unified

Name

Communications Manager Express with which the video phone is registered.

 

 

CCM/CME

IP address of the Cisco Unified Communications Manager or Cisco Unified

Address

Communications Manager Express with which the video phone is registered.

 

 

Switch

Name of the switch to which the video phone is connected.

Name

 

 

 

Switch

IP address of the switch to which the video phone is connected.

Address

 

 

 

Port

Switch port used by the video phone; for example, Fa0/12.

 

 

Port Status

Status of the port used by the video phone: up or down.

 

 

VLAN

Name of the VLAN (user-defined name); for example, voice.

Name

 

 

 

VLAN ID

ID of the VLAN for the video phone; for example, 100.

 

 

SRST Mode

One of the following:

 

yes—The phone is in SRST mode

 

no—The phone is not in SRST mode

 

?—The phone is suspected to be in SRST mode

 

—(dash)—The phone is not an SRST phone

 

 

SRST

One of the following:

Router

IP address of the router that the phone is using for SRST

 

 

—(dash)

 

 

Serial No.

IP phone serial number

 

Note This information is obtained by phone polling. See Understanding Phone

 

Polling, page 13-28.

 

 

Application

Identifier of the firmware running on the phone

ID

Note This information is obtained by phone polling. See Understanding Phone

 

 

Polling, page 13-28.

 

 

 

User Guide for Cisco Unified Operations Manager

13-36

OL-19470-01

Page 36
Image 36
Cisco Systems OL-19470-01 manual Ccm/Cme, 13-36