Cisco Systems OL-19470-01 manual Generating the Video Phone Inventory Analysis Report, 13-32

Chapter 13 Generating Audio Phone and Video Phone Reports

Using Video Phones Reports

For more information, see the following topic:

•Troubleshooting Tips for Audio Phones and Applications Reports and Video Phones Reports, page 13-19

Generating the Video Phone Inventory Analysis Report

Use Inventory Analysis to search for video phones in your network and display them in a report.

Before You Begin

Inventory Analysis searches for phones using:

•An implicit “or” within each field—If you enter more than one value in a field, Inventory Analysis searches for phones that match any value that you entered.

•An implicit “and” for all fields—If you enter values in more than one field, Inventory Analysis searches for phones that match at least one value from each field.

For example, if you enter two video phone models in the Video Phone Model field, the Inventory Analysis report that results includes all phones of these models. If, in addition, you enter a VLAN ID and a switch, Inventory Analysis searches for phones that meet all these criteria; the report that results includes only phones of the models specified that are connected to the switch and in the VLAN that you selected.

Step 1 Select Reports > Video Phones > Inventory Analysis. The Find Video Phones page appears.

Step 2 Enter values in one or more fields, described in the following table.

GUI Element	Description/Action
Find Video Phones	From left to right:
Where list boxes and	• Select one of the following:
field
		–	Extension number
		–	IP Address
		–	MAC Address
	• Then select one of the following:
		–	is exactly
		–	begins with
		–	contains
		–	ends with
	•	Enter a value.
VLAN Name field	Enter the name of the VLAN.
VLAN ID field	Enter the VLAN ID.
Video Phone Status	Select one:
radio buttons	•	Registered
	•	Unregistered

• All—Registered and unregistered phones.

	User Guide for Cisco Unified Operations Manager
13-32	OL-19470-01