Cisco Systems TEG-S2500i 3. Console -- 1K Xmodem update firmware

1 142

- 62 -

3. Console -- 1K Xmodem update

We provide the 1k X modem to update firmware on console. 1K X modem only works in 57600bps

mode. So you must change boudrate to 57600bps to download firmware.

There are 2 cases to use 1k X modem to update firmware:

a. User enters "1K X modem receiver mode" through pressing any key within 5 seconds after system

power on.

b. System automatically en ters "1K X modem receiver mode" if it detects the firmware checksum

fail while booting.

1. Press disconnect button when you start 1K X modem modes.

Press File -> Properties, change boudrate to 57600bps, then press OK.