- 109 -
4.3.3. GVRP
GVRP (GARP [Generic Attribute Registration Protocol] VLAN Registration Protocol)
GVRP allows automatic VLAN configuration between the switch and nodes.
For example, if the switch is connected to a device with GVRP enabled, you can enable this setting to
allow dynamic VLAN configuration information to be processed by the switch.
If a device sends a GVRP request using the VID of a VLAN defined on the switch, the switch will
automatically add that device to the existing VLAN.
This page you can enable / disable the GVRP (GARP VLAN Registration Protocol) support.
Actions->
1. Select <Edit>.
2. Press Space key to choose Enabled / Disabled.
3. Press Ctrl+A back to action menu line.
4. Select <Save> to save configure value.
Note: GVRP must also be enabled on participating network nodes.